AUTONET TV

Round and Round (Wheel Balancing)

In a perfect world, all wheels and tires would be perfectly round and weigh exactly the same at every point of the wheel.  Unfortunately, they're not, and if they're out of balance, they can reduce the lifespan of your tires, make your vehicle shake like a carnival ride, and maybe even damage a few suspension parts along the way.  You don't want that!

Wheel balancing, sometimes known as tire balancing, is a process by which a technician makes sure your tire/wheel assembly has evenly distributed weight.  If it isn't, it can give your ride bad vibrations.  If you feel your vehicle's steering wheel shaking, it can mean unbalanced wheels in the front. If you can feel a vibration in your seats, it could be unbalanced rear wheels.

In addition to your vehicle vibrating at higher speeds, there are other signs that your wheels are out of balance. You may see uneven tread wear, or you may notice you aren't getting the kind of fuel economy you used to. 

When you experience these problems, bring your vehicle in, and we can put your wheels on a machine designed to detect any imbalance.  The technician will start your wheels spinning, and a computer will determine how much weight is needed where.  Then, the technician can add small weights on the inside or outside of your wheel rim to precisely balance out the uneven weight.  When the wheel is balanced correctly, it will spin evenly and smoothly.

Sometimes your vehicle will hit a pothole or object in the road that dislodges one of those weights, which can throw that wheel out of balance again.  If so, you'll have to bring it in to have that corrected

Some drivers confuse wheel balancing with wheel alignment. Alignment is making sure the wheels are perpendicular to the road and parallel with each other.  Sometimes your vehicle will need both balancing and alignment done at the same time.

No vibrations are good vibrations when it comes to your wheels.  Bring your vehicle to us, and we'll perform a balancing act to keep your vehicle riding smoothly down the road.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

Steering You Right (Tie Rod End Replacement)

For drivers, S stands for safety.  And there are three other words that start with S that are all equally important: starting, stopping and steering. For your vehicle to be at its safest, all three functions must be in top shape. 

Steering is one of those things we take for granted.  After all, you turn the wheel and your vehicle changes direction. But sometimes you might notice your steering is a little off.  Maybe you've noticed you turn your wheel slightly and your vehicle doesn't turn. You may feel a little vibration in the wheel that increases when you go faster.  You may hear a little squeak from the wheels when you steer and you may notice your tires aren't wearing evenly.

These are signs that your tie rod ends may be failing. Tie rod ends help connect your vehicle's steering mechanism to the wheels.  They can wear out after you've hit one too many potholes or just from constant use.  They can cause sloppy steering and loose handling, and they should be replaced when they've reached the end of their life span.

If you notice any of these things happening on your vehicle, bring it in to us so a technician can check it out.  There are a couple of different types of steering, recirculating ball steering and the one most of the latest vehicles have, rack and pinion. When we replace your tie rod ends, we will remove and replace the old ones and adjust them to meet your vehicle manufacturer's specifications.

Tie rod ends should often be replaced in pairs, and your vehicle should be aligned afterwards.  Keep your steering working the way it's supposed to, and your vehicle will be sure to steer you right.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

How to Radiate Cool (Radiator Care)

There's nothing that radiates cool like a vehicle radiator that's helping to keep your engine running at the proper temperature.  You don't have to baby it, but you can't simply ignore it, either. 

Let's take a quick dive under the hood to let you know what the radiator is doing.  It takes the heat your engine produces and moves that heat outside.  It's not an easy job and heat is an engine's number one enemy.  Now that you're thinking how nice you want to be to your radiator, we have a couple of ideas how you can take care of it.

The easiest thing is to pay attention to your vehicle's temperature gauge. If it gets in the "too hot" or "not hot enough" range, have it checked out soon.  Make sure your coolant is kept at the correct level and if you see a trend that you have to add coolant more than a couple of times a year, you might have a leak.

Even if there are no obvious problems, every couple of years or so, consider taking your vehicle in for radiator maintenance.  A technician can run a pressure check for leaks and ensure that the thermostat and radiator cap are working correctly.  The technician will check that fans are running like they should so they can move air over the radiator and heat away from the coolant inside.

Ask your service advisor when you should have your radiator flushed and coolant replaced according to the manufacturer's recommended intervals.  In addition to cooling, coolant has corrosion inhibitors which stop working after a while.  Without those corrosion inhibitors, the inside of your radiator can literally start rotting away.  Keep in mind that the coolant level must be kept at manufacturer's specifications since if those corrosion-preventing chemicals aren't touching the metal, they're not preventing corrosion. 

Different vehicles use different coolants, so your service facility will make sure yours is getting the correct one.  Keep your coolant system happy and one day, maybe you can order up a custom license plate, "RAY-D-8."

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

See the Light (Automatic High Beam Dimmers)

It's happened to all of us.  We're driving down a highway at night and over a crest appears a car with its high beams blazing.  You are momentarily blinded, hoping the other driver will switch them to their low beam setting and restore your vision.

Not only do we not appreciate being blinded, face it; we don’t want to be that other driver, either.  You know, the one who forgets to turn down their high beams.

Why do we want high beams in the first place? They can improve safety when used correctly, giving drivers more reaction time since they can see farther down the road.  But research has found many drivers either don't use them or, when they do, they frequently forget to switch to low beams.  Enter the automatic high-beam dimmer.

The quest for the perfect one began back in the 1950s, General Motors invented something it called the "Autronic Eye." It was a phototube which sat on the dashboard and turned down your beams when it saw other headlights.  While touted as being the biggest advance in night driving safety in 30 years, it didn't work all that well.  But as technology got more advanced, systems improved.

Today's automatic high beam dimmers usually have a camera in the rear view mirror (pointing forward).  When the camera sees lights, software in the system's computer attempts to determine the source of the light, whether it is an oncoming vehicle, taillights, ambient city lights, street lights or the reflection off of a street sign.  It then adjusts the headlights to operate high beams if appropriate or a less-blinding mode if they’re not.

Some automakers are striving to make their headlight systems smarter and safer by developing lamps that can avoid blinding oncoming drivers by means other than simply dimming them. One idea? Splitting the beams so they will block just the portion that shines into the eyes of oncoming drivers.

It's a long way from the Autronic Eye. 

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300