AUTONET TV

The Part You've Never Seen (Flat Tires and Solutions)

They say your vehicle has one, but you've never seen it.  And you might not even know it if you stumbled on it accidentally.

We're talking about the jack, that tool that allows you to lift one corner of the vehicle up so someone can change a flat tire.

So you say you'd never try to change a flat anyway, so you don't care where it is.  But one day, you may find yourself in a spot where you're stranded with no cell service and you'll need to at least know the basics of what to do.

Well, here's the ironic part.  Many of today's vehicles don't even have jacks and spares!  Recently, manufacturers have been saving weight by supplying another solution for a flat tire, such as an inflator kit that has a tire sealant in it, or a small compressor.  If your vehicle has one of those, it's a good idea to get to know how to use it before you need to use it.  Hopefully you'll be able to call roadside assistance and they can take care of things, but circumstances may prevent help from coming for a long time. The next time you're here at Acheson Auto Works for routine maintenance, ask one of our pros to show you the basics of your vehicle's flat tire tools.  Consider watching an online video, too; there are plenty out there and may be specific to your make and model.

Some vehicles have a space-saving spare, a smaller one that is meant to get you on the road long enough to find a place to have it repaired or replaced.  Those vehicles will also have a jack.  Then there are vehicles that have a full-size spare tire and a jack.  Again, you may prefer to call roadside assistance, but if no one is available or reachable (which is sometimes the case in a major storm), you may have to fix your own flat.

Some drivers do a "dry run" of changing a tire in their driveway during daylight hours so they at least know where the jack and spare are and how to use them.   Our service experts may be able to help you locate each part and give you some tips.  And again, there are many videos online that can show you the fundamentals of jacking your make and model of vehicle. 

Nobody relishes a flat tire.  You may be lucky and never have to change one.  But in this case, a little knowledge is better than no knowledge at all.  In the unlikely case you are stranded at the side of a highway at night in the middle of the rain with no cell service, you'll at least be one step ahead.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

Sounds Like a Hot Rod (Noisy Exhaust System)

Driving along, your exhaust system's rumbling so loud that people turn and stare at you pass by.  You're wondering when the police are going to pull you over for illegal noise.

Your mind immediately thinks, aha! A broken muffler. 

Well, your exhaust system is composed of many more parts than just a muffler. 

Your engine makes power because of thousands of tiny explosions from detonating fuel.  Those explosions make a racket, so engineers came up with a system that acoustically dampens that sound in addition to getting rid of harmful exhaust.

In the engine is the exhaust manifold that looks like several pipes that join up into one pipe.  It directs exhaust to the catalytic converter. The catalytic converter converts harmful gases into less harmful gases using certain chemical reactions.  Then comes the muffler that has baffles inside to quiet the sounds of your engine noise.  Finally: the tailpipe.

All of those pipes and parts are joined together by clamps and held up by brackets, and they ride over some pretty bumpy roads.  They are also exposed to the elements, like salt, water, rocks and grit.  Chances are that one of those clamps or brackets has been weakened by corrosion.  When you hit a bump, bingo! The crack widens into a gap and there's a spot for the engine noise to come roaring out instead of being directed into the muffler's quieting chambers.

You might be surprised to know that the exhaust system can rust from inside out.  How? Moisture is one component of exhaust, and moisture on the inside can do the same kind of damage as moisture from the outside. 

It's a good idea to have your exhaust system looked at regularly by a technician.  He or she can evaluate the condition of the metal and recommend when it might be time to replace parts before they break.

Then you'll have a decision to make.  Newer exhaust systems are made out of stainless steel that is much less prone to corrosion issues.  Others are made of aluminized steel that also fights rust.  You've probably already guessed that they can cost more, but the extra price up front may give you an exhaust system that will last much longer. 

Sure, with a repaired exhaust system, you won't have quite the head-turning vehicle you once had.  You'll just have to live with all the quiet.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

Straight to the Point (Alignment Signs of Problems)

It’s just common sense that your vehicle will drive better if all the wheels are lined up with each other and the road the way the engineers intended.  When they’re not, that is called being out of alignment.   Here are some signs that your alignment has problems.

• Your steering wheel isn’t straight when your vehicle goes straight down a straight road. This one’s pretty easy to notice.  If your vehicle’s logo on the wheel is tilted, that’s probably not the way designers wanted it to be. Bring it in and have us check it out.
• Your steering wheel is vibrating on a smooth road or when you are accelerating.  While this could be caused by several different things, one possibility is misalignment.  If your steering wheel is shaking, it should be examined by a trained technician.
• Your vehicle is pulling to one side without you wanting it to.  Sometimes the configuration of the road will cause it to pull slightly left or right.  But if you find yourself constantly correcting course to keep your vehicle headed straight down the road, that’s worth having us look at your alignment.
• You’re going through tires like there’s no tomorrow. The tread on your tires should be wearing nice and evenly from the outside to the inside of the tire.  If the wear isn’t even, it could be your vehicle needs an alignment.

We have equipment designed to quickly and accurately measure your vehicle’s alignment.  We can make precise adjustments to make sure you are headed straight where you want to go.  Have your alignment checked regularly. It can help prevent more serious problems in the future and make your vehicle drive as beautifully as you remember it used to.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300