AUTONET TV

See the Light (Bulb Replacement)

When you notice one of your headlights has gone out, it’s important for the safe operation of your vehicle to get it changed and working again.  Not only is replacing a headlight important for your ability to see in the dark, but it’s also vital that it be lighting your way and aimed correctly so oncoming drivers aren’t blinded.  

Changing a headlight used to be something a driver might try to do themselves.  But that was back when headlights were standard sizes and fairly easy to access on your vehicle.  That has all changed with new technology and designs in today’s vehicles.  Most lamps are now LEDs, and there are different sizes, intensities, and shapes in different vehicles. Accessing those bulbs has also grown extremely difficult in some cases, and we recommend you have one of our professional technicians do it for you.

It's just as important that your brake lights and side marker lights work, too, as they contribute to the safe operation and visibility of your vehicle.  A technician will check to see what is causing a light not to illuminate, which could be a bulb, but also could be a problem with the electrical system in that bulb’s circuit.

Having all your lights working is not only a matter of convenience, but a matter of safety too.  So don’t be in the dark when you don’t have to be. Let our technicians light up your life a little by making sure all your bulbs are working right.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

Mercury Rising (Hot Weather Vehicle Concerns)

The heat is on, and your vehicle takes a beating when it is.  Several of your vehicle's systems are under extra stress in hot weather, so here are a few to make sure are getting the care and maintenance they need.

It makes sense that the cooling system is one to make sure is in top shape.  Vehicle breakdowns in summer are often due to a problem with one of the cooling system's components.  Coolant levels have to be up to specs, the ratio of coolant to water must be correct and the hoses, pumps, belts and radiator must all be working properly in order to prevent vehicle overheating.

Summer is also hard on your air conditioning system.  You might find that no air is blowing out of the vents or maybe only hot air is coming out.  Air conditioning equipment is best diagnosed and repaired by a trained and experienced technician.  The problem could be in any number of components, including the condenser, compressor or blower motor.

You may think the battery gets a break in the summer, but heat will shorten the life of your battery more quickly than cold.  Your service facility can analyze the condition of your battery and tell you whether it's healthy or needs replacing.

Tires take a beating in heat, too.  Pavement can be scorching hot, and the sun's rays break down the rubber.  Watch inflation pressure in hot weather, too, since air expands the hotter it gets.  Your technician can check air pressure, tread depth, cupping and other uneven wear and diagnose the source of any problems. 

And don't forget brakes.  One video online says brakes on a car that were driven hard on a track reached temperatures as high as 500°C/932°F.  Heat can reduce stopping power.  A technician should periodically inspect pads, rotors, drums, lines and other components to find a problem before you lose the ability to stop.

Finally, engine oil is really put to the test when it gets hot.  Your vehicle service facility will make sure you have enough oil and the proper kind to keep your engine's components properly lubricated.  Help your vehicle beat the heat.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

Braking Good (Brake Drum Replacement)

Maybe your vehicle feels like Breaking Bad.  In other words, when you brake, things are bad.  You may find it takes you a longer distance to stop, you feel a vibration, or it’s pulsating when you depress the brake pedal, or perhaps your vehicle pulls to one side.

Those can be symptoms of failing brake drums.  While a lot more vehicles these days have disc brakes, many vehicles still have brake drums, almost always in the rear wheels. The drum is a cast iron shallow cylinder that surrounds the other parts, including curved brake shoes that press pads against the drum to slow you down or stop the vehicle.

Any time you have things going wrong with your brakes, you should get them fixed soon.  Safely operating any vehicle depends on having the brakes be able to slow and stop you dependably.  It can make the difference between avoiding a collision and having one. 

When you bring your vehicle in, a technician will inspect your braking system. Depending on the wear, drum brakes can be resurfaced or replaced. Sometimes it’s cheaper to replace the drum than to resurface it.  It’s important for all the other brake system components to be inspected first and all worn parts replaced.  

Most of the time, when you have your drums resurfaced or replaced, the brake shoes should be replaced at the same time. You have brakes at each end of your axles, and the same brake service should be done at both ends so that both sides can have consistent, even stopping power. 

Your brakes can save your life.  If their braking power is bad, you owe it to yourself and others on the road to let us help make them good again.  Good and safe.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

How Cool is That! (Coolant level sensor replacement)

Your vehicle’s engine runs hot.  It should, since it’s a series of little explosions that create the power that gets you going where you want to go.  To keep the engine cool, engineers have designed wonderful cooling systems that use liquid coolant, hoses, and a radiator to transfer the heat from the engine to the outside air. 

In order for the system to work right, it has to have the right amount of that liquid coolant in it.  So that you know when the coolant has dipped below the correct amount, there is a sensor that keeps an eye on it.  When the coolant gets low, that sensor lights up a signal on the dash to alert you.  It may literally say “Check Coolant” or it may have a picture that looks like an old-style bulb thermometer sitting in liquid.  Your owner’s manual will usually tell you exactly what the one in your vehicle looks like.

If that sensor system isn’t working right, you could wind up driving for a long time with not enough coolant in the engine, and the excess heat can cause some extensive—and expensive—damage. 

There are a couple of ways you will know if something’s wrong with your coolant level sensor.  One is when you top off the coolant tank, and the low coolant light stays on.  If you suspect yours might be having a problem, bring it in so we can thoroughly check your coolant system.

If it is a sensor, we can run a test to see where the problem is in your cooling system.  It could be a bad sensor, but it also could be that there is something causing your coolant level to be low.  If the sensor needs replacing, the technician will replace it, fill your coolant level to the manufacturer’s recommended level, and test for any leaks in the system.  Really, how cool is that?

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

test

TCB your PCV (PCV Valve Replacement)

Your gasoline engine goes through some exhausting work.  Yes, it's truly exhausting, as in: it produces exhaust! And when your engine starts behaving like it's exhausted, such as running poorly or getting lousy fuel economy, the trouble may be something called a PCV valve.

Did you know it's a series of explosions that creates the power in your engine? The spark plugs ignite a mixture of gasoline and air and BANG! A whole bunch of those and you're engine is humming away. Leftover vapors from those explosions go into your crankcase, which is also a place where engine oil goes.  Those vapors still have a lot of unburned fuel in them, and if they had nowhere to go, they'd turn your oil into a thick mess called sludge, not good for a smooth running engine. 

Engineers came up with an idea. Re-direct those gasses building up in the crankcase into the engine's air intake and mix them with fresh air.  That way the unburned fuel could go through the engine again and produce power. It also means the unburned fuel doesn't pollute the air.  The part that makes that happen is called the Positive Crankcase Ventilation (PCV) valve.

Besides reducing pollution and preventing the oil from turning to sludge, the PCV valve also relieves pressure in the crankcase, reducing the potential for oil to leak. One of the reasons you should get your oil changed as frequently as your vehicle's manufacturer recommends is that it helps reduce chances for problems with the PCV valve.

After a while, the PCV valve can itself get gummed up and stick, and the driver may notice oil leaks, reduced power or engine hesitation.  That's why it's important to make sure the PCV valve is operating like it should, and often it can be diagnosed during a visual inspection by our technicians.  Replacing a PCV valve is usually quick and inexpensive.  After it's done, your vehicle will run with the performance and fuel economy you're used to.  Goodbye exhaustion!

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300