AUTONET TV

Sniffing Out a Problem

Your parents probably taught you to have common sense. When it comes to your vehicle, common scents can also come in handy. Different smells may tell you about some conditions in your vehicle that need attention.

For example, you know what rotten eggs smell like.  If you smell them around your vehicle, it means sulfur can't be far away. Here's a surprising fact: Gasoline has a little sulfur in it.  There's a device in your exhaust system that's supposed to convert it to something that doesn't pollute the atmosphere. That device is a catalytic converter.  If you are smelling rotten eggs, maybe your catalytic converter is wearing out.  But it could also be a problem with your fuel injectors.  Either way, something's rotten that should be repaired.

Ever smell something sweet around your vehicle, maybe a little like pancake syrup? If you sniff out a little sweetness just when your engine is warming up or after you shut off your engine, you might be smelling some coolant (anti-freeze).  If it's leaking, then you may be getting a whiff of ethylene glycol, one of the coolant's components.  If the odor is strong inside the car, it could be a leaky heater core. This is important to get checked out because a leak in your vehicle's cooling system can eventually cause expensive damage.

How about that distinctive smell of gasoline? You could have a leak in your gas tank, a hose that vents your gas tank or a leak in a fuel injector line.  A gasoline leak needs to be tracked down since it could catch fire.  It can also be bad for your health if you breathe it in all the time.

When you step hard on the brakes, ever smell something like a rug's in fire? That could mean you've just overheated your brake pads.  If you detect that smell just driving around town, one of the brake calipers could be stuck.  To figure out which wheel has the problem, get out of your vehicle and smell each wheel.  It will likely be obvious where the problem is.

Here's one last smell.  Ever had your oil changed and right after you picked up your vehicle it smells like something's burning around the engine? That's because sometimes a little oil leaks onto the metal when the filter is changed or the oil is poured in.  It's a useful smell to know.  Because of you smell burning oil and you haven't had your oil changed recently, that could mean you have a leak in your engine.  It could be a gasket or a seal, but it also could mean the start of more serious issues. 

All of these things are signals that you should discuss with your service advisor to get them checked out.

Trickle Down Technology

Recently, Nissan introduced the latest version of its Leaf, the company's electric car. It has many new features, including something called e-Pedal. It allows the driver to let up on the accelerator and, unlike a gasoline engine car, the Leaf doesn't just slowly lose speed; letting off the throttle pedal brakes the car in a very controlled way, using regenerative and sometimes friction brakes. With practice, a driver can go for a fairly long time without touching the brake pedal.

Another system, similar to those found in self-driving vehicles, can steer the car to keep it in the center of the lane using a camera and radar. It literally watches the lane markers and, of course, doesn't work well in snow that obliterates those markers. But the technology is impressive and can greatly reduce fatigue on long trips.

In fact, much of this technology has "trickled down" from research on autonomous vehicles, such as adaptive cruise control that slows down your vehicle (even to a stop) if the vehicle in front of you decelerates or stops. And we can expect these features will eventually find their way into all price levels of vehicles if the past is any indication.

There was a time anti-lock brakes were only found on premium vehicles; now they are on nearly all new vehicles. Traction and stability control are also prevalent, helping drivers reduce slippage and maintain control, thanks to computers.

With SUVs and trucks so popular, rear backup cameras help drivers see behind their tall back ends, reducing injuries, deaths and property damage. Bumper sensors and cameras allow drivers to be visually and aurally aware of their surroundings with 360° protection.

Many of these features improve our vehicle's safety and efficiency, and we can expect new technologies to crop up in the future. But just like the mechanical systems in your vehicle, it's important to maintain the electronic and computerized systems. Technicians at Acheson Auto Works constantly train to keep up on these latest developments. Make sure all your vehicle's components are maintained in top condition.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

PCV Valve: What Is It?

Most CLIVE drivers know something about preventive maintenance on a vehicle. We know we should routinely replace the oil and wiper blades and other fluids. But have you heard of a PCV valve ? This little car part needs to be replaced regularly or it can cause some serious problems in your vehicle engine.

PCV stands for Positive Crankcase Ventilation. The crankcase holds your motor oil and is located at the bottom of your engine.

When fuel is burned in your engine, it produces waste gases that are mostly vented out through your exhaust system. But some of these gases push their way past the pistons and into the crankcase. There, these gases can mix with motor oil to produce oil sludge, which can damage vehicle engine parts through corrosion and by clogging engine passages. CLIVE vehicle owners should be advised that if the engine is running at high speeds, these gases can also cause pressure inside the crankcase to build up. This pressure, in turn, can blow gaskets and damage seals, leading to oil leaks.

The waste gases that leave the engine are comprised of about 70% unburned fuel. They used to be vented off the crankcase into the atmosphere. But starting in 1964, laws mandated that these gases be recaptured. Manufacturers began installing PCV systems, which recycled the gases into the air intake system where they could be mixed with fuel and sent to the engine to be burned.

The PCV valve is a one-way valve attached to the crankcase. Waste gases exit the crankcase through the valve but cannot enter.

Over time, the waste gases leave deposits on the PCV valve that can gum it up. So it needs to be replaced occasionally. This is an inexpensive part of preventive maintenance that is often overlooked, but which can have very expensive consequences. It's good auto advice to keep this little valve clean and working well.

In order to maintain efficient circulation, the PCV system also has a breather tube that allows clean air to enter the crankcase. This air is usually filtered through the engine air filter. But some vehicles have a separate air filter for the breather tube called the breather element. If this is the case with your vehicle, proper maintenance of the PCV will include replacing this element. To find out whether your vehicle has this type of PCV system, check your owner's manual or ask your service advisor at Acheson Auto Works.

The PCV system reduces harmful vehicle emissions. The maintenance it requires is simple and inexpensive at Acheson Auto Works. A fouled or damaged PCV system can lead to serious engine damage for CLIVE drivers.

Let's all learn to practice good car care. It's good for our wallets, and it's good for our IA environment.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

A Sticky Brake Situation (Parking Brake Service and Maintenance)

We've all been there.  You park your vehicle on a steeper than usual hill and worry about it rolling down while you're running your errands.  So you decide you'll use the parking brake.  When you get back, you release the parking brake, hit the ignition, put it in gear and—uh, oh—you can feel the parking brake is still on.  It's stuck.  What do you do now?

Welcome to the world of infrequently-used parking brakes.  Yes, they do stick for several reasons. It's common for components to corrode and get locked up.  Sometimes if you have applied it extra hard, it can jam.  Could be a rusty cable, could be a spring that doesn't return the brake to its disengaged position.  Some pieces just break when they're stressed for the first time in a while. A caliper or the pivot arm it's on can also stick.

There are a few things you can try to unstick it.  Carefully rock your vehicle by putting it first in drive and then reverse.  You have to be careful doing that, though, because sometimes you can damage the transmission.  You can try working the parking brake control a few times to see if that will loosen the corrosion.  If you can't unstick it, you can try driving slowly a short distance to a repair facility near you.  Sometimes it won't cause damage to the brakes but it depends on how tightly the parking brake was applied and what was stuck.  You may also have to have your vehicle towed to a repair facility.

In any case, once you've seen these symptoms, have your vehicle brakes looked at by a professional who can fix the root of the problem.  Better yet, don't let your vehicle get in this condition; regular maintenance and inspections by a trained technician should prevent you from getting in a jam somewhere thanks to a stuck parking brake.  You could use a "brake" like that.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300