AUTONET TV

The Edible Engine

You may have had a friend whose vehicle was the victim of hungry rodents.  After all, mice, rats and squirrels—even rabbits—have been known to gnaw on wires in engine compartments, causing vehicle electrical systems to go haywire.  They can disable a vehicle completely and be very expensive to fix.

In 2017, some drivers noticed their vehicle's wiring was being chewed and found out the automaker was using a relatively new material for covering their wires: soy.  Many of the repairs to their new vehicles weren't covered under warranty by the manufacturer when it was discovered rodents were eating the wiring.  So the owners filed a class action suit, saying the soy covering was essentially baiting the critters. 

The automakers tell a different story, saying mice, rats and squirrels have been chewing through wire insulation long before it was made out of soy. 

Regardless of what the insulation is made of, vehicle owners should make sure rodents aren't chowing down and creating a problem in the engine compartment.  They can have their repair facility check for these signs:  Little bits of acorns, leaves, chewed up plastic and animal droppings in the engine's nooks and crannies.  Using a black light, your technician can detect animal urine, a sure sign that they've been using your engine compartment as a warm apartment, a nest and a dining room. 

You can take steps to prevent rodents from chomping your vehicle's parts.  Honda—one of the vehicle manufacturers that uses soy-based wiring covering—makes a rodent tape.  It contains a spice called capsaicin that rodents find too hot to handle.  Other preventative measures include installing metal mesh around wiring harnesses or spraying the engine compartment with special rodent-repellants. 

Rodent damage can cost one vehicle owner thousands of dollars to fix, not the kind of bite anyone wants taken out of their bank account. 

Take Charge! (Battery Testing)

OK, so you probably take your vehicle's battery for granted.  Turn the key or push a button and it starts right up.  During times of warmer weather, you probably think your battery can take it easy.  But it may surprise you to learn that hot weather can be much harder on a vehicle's battery than cold.  So it's wise to know what condition your battery is in BEFORE you find out the hard way—being stranded by a dead battery.

Your vehicle's battery won't last forever; an average battery will last 3-5 years.  When's the last time yours was replaced? You probably have no idea.  Your vehicle will usually give you some hints that it's in need of attention.  See if any of these are familiar:

• your engine doesn't turn over as quickly as it used to
• your headlights are a little dimmer
• your Check Engine or Battery dashboard light is on
• you hear a click when you try to start your vehicle
• some electrical equipment in your vehicle isn't behaving the way it used to
• your engine smells like rotten eggs
• the terminals on your battery are corroded
• your battery was made more than 4 years ago

Even if there are no signs your battery is on its last legs, it's a good idea to have it periodically checked at your vehicle service facility, at least once a year. A technician will check the date it was made (it's on the battery's case). They'll inspect your battery, cables and connections, looking for corrosion, bulges in the battery or any other abnormal signs.

Using special diagnostic equipment, the technician can run some tests on your battery and vehicle's electrical systems. They can measure how fully charged your battery is and how much potential it has to hold a charge.  Then, your service advisor will tell you how much more life to expect from your battery or recommend it be replaced. 

It you need a new one, your service advisor can recommend options for you. Important factors include brand, warranty, where the terminals are on the battery, the ability to handle different cranking loads and temperature ranges.  Bet you didn't know vehicle batteries can be that different!

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

Restore Your Get-Up-and-Go (Fuel and Air Induction Cleaning)

You may have heard the old saying, "My get-up-and-go got up and went." If your vehicle's engine's fuel economy is noticeably worse, your engine is idling roughly or stalling or your vehicle's acceleration isn't what it used to be, ask your service advisor if you might need your vehicle's fuel and air induction systems cleaned.

As the hours pile up on your engine, carbon deposits can build up.  It's not unusual for some of the impurities and additives in fuel to leave behind a black residue that eventually will negatively affect your fuel economy and performance. Maybe you're noticing your engine is harder to start, you hear knocking or pinging in your engine and your vehicle just doesn't have the pep it used to.

While it's a sophisticated process with a lot of components, a gasoline engine essentially produces power by drawing in air from the outside and mixing it with fuel in the cylinders where this blend of fuel and air is ignited by spark plugs in synchronized explosions.

The fuel and air enter your engine through the fuel induction system and air induction system. Because of things like high operating temperatures and impurities, carbon in the fuel can leave behind dark, sooty deposits in the fuel induction system such as the fuel injectors and the throttle body. These and other residue reduce your engine's efficiency and performance. Our service center can use special fuel injector cleaners to remove those deposits from your engine.

The technician may manually clean some of the deposits and also put a fuel additive in the fuel tank that will get rid of other deposits that are still in the fuel system

Keeping the air induction system clean is also important.  A technician can use a liquid cleaner specially designed for the job. Not only can this improve your fuel economy, it may also reduce exhaust emissions and help your engine last longer.

Most gasoline now contains detergents that help reduce or prevent these problems, but direct injection is now being used in more vehicles that are more susceptible to clogging. Ask your service advisor if your vehicle could benefit from fuel and air induction cleaning. 

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

Oil's Well That Ends Well (Oil Change Grades and Weight)

Changing your oil regularly is one of the most important things you can do to keep your vehicle running well.  And knowing the right type of oil to use is also very important. 

Engine oil is classified by weight, but it doesn't refer to how much the oil would weigh if you put it on a scale.  It refers to viscosity, or how easily the oil flows through the engine.  Most engines operate normally at around 210°F/99°C.  The viscosity, or weight, is assigned a number by how well it flows at that temperature.  The lower the number, the more freely it flows. 

Most vehicle engines use what's called a multigrade oil which behaves differently in different temperatures. Multigrade oils have a "W" in their viscosity number that you may have seen on a bottle of oil, something like 5W30.  The W stands for winter and shows how freely it flows in colder temperatures.

That means a 5W30 oil will behave like a 5 weight oil in lower temperatures (less viscous or thinner) and a 30 weight oil in warmer temperatures (more viscous or thicker).  That's important on a cold day because the oil needs to behave like a thinner oil when you start your engine since it need to lubricate engine components immediately to protect the metal components. Then as the engine warms up, it behaves like a thicker oil to prevent friction among those parts.  Pretty neat trick, right?

The type of oil you use can differ depending on what type of climate you operate your vehicle in and how your vehicle is used (carrying big loads, towing, etc.). Your owner's manual contains several different recommendations based on these factors.  Your service advisor can recommend the right oil for your needs.  Like Shakespeare said, "Oil's well that ends well."

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300