AUTONET TV

A Hot Mess (AC System-Compresser)

Air conditioning used to be a real luxury in a vehicle, but now it's standard in most.  Your vehicle's air conditioning system is built to last a pretty long time, but like anything mechanical, sometimes it fails. 

It helps to know a little about how the A/C works. There's a compressor that pressurizes the refrigerant (you probably recognize the term Freon).  That makes it hotter, so it then goes through a condenser that cools it off.  Then another component takes out impurities and humidity before the Freon goes to a device that makes it lose pressure before it goes to the evaporator.  That's where it gets colder and takes the humidity out of the air. Then your vehicle's ventilation system blows air over the evaporator, cooling the cabin air that gives you such relief on a hot day.

Of all these parts, one that does a lot of work is the compressor.  It has to compress that refrigerant and circulate it through the system.  It turns on and off several times when it's working. The good news is that if it's going to fail, it sometimes lets you know. 

One of the signs that your air conditioning compressor is going bad is a noise under the hood when the engine is on, sometimes a squealing or grinding sound. It usually is pretty noticeable. Compressors have a bearing that can seize up after time, causing the belt that drives it to squeal when it's trying to turn something that won't turn.  It will sometimes cause that belt to break. 

Your service advisor can tell you if your compressor is repairable or must be replaced.  In the case of a broken belt (often a serpentine belt that drives several components) the belt will have to be replaced as well.

The compressor also has a clutch that turns the compressor on and off so it doesn't have to run all the time. Sometimes that clutch can fail, too, and your service advisor will often recommend you replace the compressor and the clutch at the same time. Our technicians can help make sure your air conditioning system keeps its cool, and you along with it. 

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

The Turn Signal Mystery (Turn Signal Problems)

Some problems are easy to diagnose on a vehicle; others aren't.  Figuring out what's wrong with a malfunctioning turn signal sometimes fits into both categories.  By the way, if your tempted to just leave your broken blinker broken, remember you can get a ticket for not using them, not to mention you are missing a great chance to communicate your intentions to other drivers on the road.

There can be lots of signals that your signals are on the blink.  Does only the driver's side signal not work or the passenger's side? Do your hazard signals work? Do the lights illuminate but not flash? Can you see the indicators on the dash blinking? Do your turn signals turn off after you've finished your turn or do they stay on?  These are all great clues for the technician.

Here's one common symptom to take note of.  Your signal all of a sudden starts blinking much more quickly than it used to.  It could be a simple as a burned out bulb.  But there are many different parts that go into the turn signal system.  There are fuses that blow, switches that can fail, flasher modules that go bad and light bulb sockets that can simply get corroded or dirty.  When that happens, it's possible there's no contact between the bulb and the socket.

So it's understandable how tracking down the source of the problem can involve some detective work.  Your service facility has equipment that can nail down the cause of your problems. They may also consult the repair manual.  One thing to be aware of: if your vehicle has airbags, they may have to be disabled so they don't accidentally go off.

You can make sure your turn signals are working correctly by having them checked by a trained technician.  Other drivers will thank you for showing them the courtesy of signaling your intentions.  It's a courteous and considerate thing to do, not to mention it makes the road a safer place. 

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

Alleviate the Creaks and Squeaks (Chassis Lubrication)

If your vehicle creaks and squeaks when you drive down the road, it may mean that some of the metal parts are rubbing against each other and need to be lubricated.  Those could be parts of the suspension, steering system and the drivetrain. 

Years ago, most vehicles had to have their chassis (what you think of as the frame) regularly lubricated.  Newer vehicles are made with what some call "lifetime lubrication," but there are still parts of the chassis that need to be maintained with lubricants.  Your service advisor can help you know when that needs to be done.

In your owner's manual, the vehicle's manufacturer lists components that need regular maintenance. Things like u-joints, steering joints, sway bars, bushings and joints in the suspension. Some of them may have that "lifetime lubrication," while others may not. When you bring your vehicle in for service, a technician will look for any parts that have grease fittings.  They will inspect these components, clean the fittings so dirt and other contaminants won't be forced into the part and then lubricate them with a lubricant that meets the manufacturer's specifications. 

Sometimes a chassis lubrication is done at the same time as an oil change.  That's also an ideal time for the technician to check other parts of your vehicle that may need attention.  That could include greasing other parts such as the fuel door, trunk and door hinges, suspension springs and door latches.

Times have changed since the days when a "lube" job was synonymous with an oil change. Depend on your owner's manual and advice from your service advisor to know when "grease" is the word—and appropriate for your vehicle.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300