AUTONET TV

"Current" Affairs (Blown Fuses)

You may be driving along and find that suddenly your radio stops working.  There are no numbers on the display.  Then when you get home, you notice the garage door opener doesn't do a thing when you press the button. Hmm, this was working just fine this morning.  Are the two problems somehow related?

No, your vehicle doesn't need an exorcism. This has all the signs of an electrical issue, and when you experience symptoms like those, you've probably blown a fuse.  Most vehicles have fuses just like most houses have circuit breakers (some houses still have fuses). They cut the power when it reaches a pre-determined threshold that could cause major damage if it was allowed to continue.  You might say fuses take one for the team.

Most modern automotive fuses are plastic with a thin strip of metal in them designed to melt when a calibrated amount of power passes through.  The philosophy is it's better for an inexpensive fuse to be destroyed than your sound system or your engine's main computer.

It can be tricky to figure out what fuse has blown and why.  Modern vehicles have many computerized electronic components; they can easily be damaged if too much electricity gets to the wrong spot.  At Acheson Auto Works in CLIVE, we have technicians trained to trace which fuse has blown and why.

While sometimes a simple fuse replacement will fix the problem, other times there may be some other electrical component that has failed, causing the circuit overload.  Our technicians have special equipment to track down where the power problems are, get to the root of the problem and fix it at the source.

Keep in mind, fuses are there to protect your vehicle. And when they shut down your radio, garage door opener, vanity mirror or anything else, just be thankful they're doing their job. They may have saved you from a much more expensive repair. They've sent an important signal to you about your electrical system.  That's why it's good to keep up with "current" affairs.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

Why Alignment Matters (Vehicle Alignment Maintenance)

It's one of those things that can happen on a multi-day road adventure or a quick trip to the grocery store.  You hit a pothole, go too fast over a speed bump, nail a curb.  When it happens, you think, "I wonder if that was hard enough to do any damage?"  But things seem ok and you continue on your way. 

Keep in mind that any blow to your vehicle's suspension can throw it out of alignment.  It can be a hard knock from the road or from another vehicle, such as being involved in a minor accident.  When your suspension is out of alignment, it means that the wheels aren't all pointing where they should.  And after a while, it can make your tires wear unevenly and cause problems with steering and handling.

Let's go back to that pothole or curb you hit hard.  Even though you think there was no damage done, if you wait until you see tire wear, you may need to replace all four tires, not an inexpensive proposition.

That's why it's a good idea to make sure your alignment is regularly checked by a qualified technician. If you get regular oil changes (a MUST!), consider having an alignment check while your vehicle is in.  That's especially important if you drive roads that resemble the lunar surface.  If you buy new tires, it's also strongly recommended that you have your alignment checked. 

You can have your front wheels aligned or all four, and if your vehicle is newer, it's not a bad idea to spend a little extra for the four-wheel alignment check.  Good alignment pays off with better steering and handling, less tire wear and—BONUS—better fuel economy since aligned wheels offer less resistance when they roll on the road.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

Not-So-Common Sense (Sensor Failures)

So your vehicle won't start.  What's the first thing that comes to mind?  Battery dead? Starter motor worn out? Out of gas?  Well, those are all reasons that make sense.  But your vehicle may be refusing to start because one of its computers is being warned that to do so might damage it.  Here's how that works.

You have lots of computers in your vehicle.  They need to know the status of things so there are several sensors monitoring various things going on.  These sensors send information to the computers that adjust the fuel and air mixture so you don't waste fuel.  They know when things aren't quite right and prevent you from starting your engine if that's going to damage it. 

Other sensors make sure the coolant is the right temperature, check to see you are not polluting the air and make sure other electronic components are performing their tasks correctly.

Here's an example of a sensor doing its job.  Your engine needs oil to lubricate metal components so the friction doesn't damage them.  Your engine has an oil pressure sensor that tells a computer called the Electronic Control Unit (ECU) if things are good to go or if there's something wrong, maybe the oil pressure is too low to keep things lubricated.  If it is, it gives a signal for the vehicle not to start, protecting the engine. 

Of course, the sensors can go bad, too, with some of the same results.  And so someone has to figure out if it's the sensor that's failed or if it really has detected a problem.  That is the challenge for technicians with specialized equipment to decipher the signs.  If a bad sensor is found, it may need to be replaced.  Sometimes a thorough cleaning can do the trick.  In either case, your service facility can track down the problem and get you back on the road.  Makes sense, doesn't it?

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

Don't Blow a Gasket! (Valve Cover Gasket Replacement)

When you head out to your vehicle after it's been parked and notice oil leaking underneath it, that's something to have looked at right away.  Oil leaks mean your oil level is probably low and running a vehicle in that condition can lead to expensive repairs.

While there are many reasons oil leaks develop, one possibility is a bad valve cover gasket.  Vehicle engines have a cover bolted over the spot where the engine valves are, and that cover keeps the oil inside the engine. In between the cover and the engine is a gasket that keeps that seal tight.  But after many years of high engine temperatures and vibrations, that gasket or the bolts that hold on the valve cover can fail or loosen, and oil can leak.

You may see dirty oil on the valve cover in the engine compartment, near the spark plugs, or around the bolts that hold the valve cover on.  All those are signs of leakage and time to bring your vehicle in for our technicians to check out.

In some vehicles, taking off the valve cover and replacing the gasket is a relatively easy job. In some models, though, other engine parts are located near that part of the engine and must be removed to get at the gasket, so repair costs can vary widely.

The technician will measure to make sure the valve cover isn't warped so it can be reused. If it is warped, they'll recommend replacing it with the gasket.  

While the technician has that area of your engine accessible, they will also check to see if other components need replacing at the same time, which could save you money.  And because valve cover gaskets usually fail in older vehicles, the technician will check for other oil leaks then, too. 

One of the best ways to be sure your valve cover is doing its job is to have your vehicle regularly maintained.  The technician will periodically look over your engine compartment and make sure you know when things are showing signs of age and wear BEFORE they fail and leave you stranded.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300

Chilly Warning (Diagnosing a Noise in Cold Vehicle)

When the weather gets colder, sometimes the noises your vehicle makes will change.  For example, you may notice a whining sound when you get going in the morning.  It may go away when the vehicle warms up, but it's best not to ignore that sound because it could be a warning of worse things to come.

Colder temperatures cause different components to behave differently.  Let's take a look at a few of them.  First, the fluids in your vehicle.  Cold temperatures can make them behave a little differently, such as engine oil, transmission fluid and power steering fluid. Those characteristics could change if the fluids are older and full of contaminants.

Belts also can create a whining noise when cold.  Since they turn pulleys that move other things, several factors can create issues.  Increased friction can change proper tensions on belts.  Plus, belts change as they age and may crack, get loose or develop a glazed surface. Belts and pulleys also must be aligned properly to work the way they're designed to.

As you can imagine, it's easier for a technician to diagnose a noise if the vehicle is making it.  And if a vehicle only makes a noise when it's cold, that sound may be gone by the time the vehicle makes it to the repair facility.  That means a driver may have to consider dropping off the vehicle the night before so the technician can be the first to start it the following morning.  Most service facilities can accommodate that with either a drop-off box or other arrangement.  Heed your vehicle's warning when you start to hear unusual noises.  That's a cool idea you should be able to easily warm up to.

Acheson Auto Works
8000 UNIVERSITY BLVD
CLIVE, IA 50325
515-223-4300